PRESSING INSTRUCTIONS

A commercial heat press is required for screen print transfers. We do not recommend the Cricut easy press, it does not produce enough pressure for transfers to adhere properly. You should always check the temperature of your press with an infrared thermometer before you begin pressing. It is common for heat presses to run hotter or colder than the digital temperature actually shows on your press. In this case, you may need to adjust your temperature to make the proper accommodations.
 

Single Color Screen Prints

Pre-press garment to remove moisture.

Temp: 325-350 degrees Fahrenheit

Pressure: heavy (this is the most important piece, if it’s not sticking, you need more pressure!)

Time: 10-20 seconds

Peel: Always peel HOT Do not cover with anything (Teflon).

If you need to repress, we recommend protecting the print with parchment paper.

 

Clear Film Screen Prints

Pre-press garment to remove moisture.

Temp: 325-350 degrees Fahrenheit

Pressure: heavy (this is the most important piece, if it’s not sticking, you need more pressure!)

Time: 10-20 seconds

Peel: Always peel HOT Do not cover with anything (Teflon).

If you need to repress, we recommend protecting the print with parchment paper.

 

High Heat Screen Prints

Pre-press garment to remove moisture.

Temp: 350-375 degrees Fahrenheit

Pressure: heavy (this is the most important piece, if it’s not sticking, you need more pressure!)

Time: 7-10 seconds

Peel: Always peel HOT Do not cover with anything (Teflon).

If you need to repress, we recommend protecting the print with parchment paper.

 

Puff Screen Prints

Pre-press garment to remove moisture.

Temp: 350 degrees Fahrenheit

Pressure: heavy (this is the most important piece, if it’s not sticking, you need more pressure!)

Time: 7 seconds

Peel: Always peel HOT Do not cover with anything (Teflon).

If you need to repress, we recommend protecting the print with parchment paper.

 

UV DTF Wraps & Decals

 1. MEASURE CUP AND DECAL WRAP. TRIM EXCESS FROM SIDES OF DECAL AS NECESSARY, AS WELL AS TO AVOID THE WRAP OVERLAPPING WHEN APPLIED ON THE CUP.

2. PEEL DECAL WRAP OFF OF WHITE BACKING.

3. LINE THE DECAL FILM ONTO THE CUP AND STICK DECAL TO CUP, STARTING ON ONE SIDE AND PRESSING THE WRAP DOWN ONTO THE CUP. THE ADHESIVE IS VERY STRONG, ONCE APPLIED TO THE CUP, IT CANNOT BE REMOVED

4. USING A SQUEEGEE, RUB THE DECAL REALLY WELL TO PROPERLY ADHERE AND WORK OUT ANY AIR BUBBLES. THE MORE RUBBING THE BETTER. 

5. PEEL OFF CLEAR FILM

 

**HAND WASH ONLY. NOT RECOMMENDED FOR USE IN DISHWASHER OR MICROWAVE. NOT RECOMMENDED FOR USE ON CUPS WITH A SUBLIMATION COATING. 

 

- PLEASE NOTE, NOT ALL 16oz GLASS CANS ARE THE EXACT SAME SIZE, MEASURE YOUR CUPS AND THE WRAPS. TRIM IF NECESSARY. 

 

WE ARE NOT RESPONSIBLE FOR USER ERROR WHEN APPLYING THE WRAPS, OR DAMAGE WHEN APPLYING, WRAPS NOT FITTING YOUR CUPS, OR DAMAGE FROM WASHING.